Buy/Sell Process/Power Plants, Used Process Equipment|ippe.com
 

Complete Column Systems From Ethylene/Propylene Cracking Plant

Complete Column Systems Immediately Available For Sale!

 

 

Complete Column Systems
Immediately Available For Sale!

Look for IPP's upcoming emails about other liquidation items from this Ethylene/Propylene Cracking Plant Liquidation.

Please fill out the form to the right so that a member of our sales team can answer any questions for you regarding these column systems, set up an inspection or address any equipment or plant needs you may have.

Featured Complete Column Systems
(Partial Inventory. Over 200 In Stock.)

  • Solvent Recovery Column System
    • Stock #222150
    • 4.5' (1.37 M) dia. x 64.5' (19.66 M) with 27' (8.23 M) tall skirt
    • Built: 1998
    • CS construction
    • Fluor Daniel design
    • 135 PSIG @ 379°F with (30) trays
    • Previously used to separate the Octene Co-monomer from the Hexane solvent which was used as a non-reactive polymer solvent in an LLDPE plant.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • (2) Shell and tube heat exchangers (1,666 sq. ft. and 414 sq. ft.)
      • 1,600 Gallon CS accumulator vessel
      • (4) Pumps (Two each of Goulds and Durco)

  • Solvent Purification Column System
    • Stock #222151
    • 3.5' (1 M) dia. x 64.5' (19.66 M) with 27' (8.23 M) tall skirt
    • Built: 1998
    • CS construction
    • Fluor Daniel design
    • 193 PSIG @ 410°F with (30) trays
    • Previously used to purify the unreacted Octene being recycled in an LLDPE plant.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • (4) Shell and tube heat exchangers (139 sq. ft. to 450 sq. ft.)
      • 886 Gallon CS accumulator tank
      • (4) Durco pumps

  • Solvent Drying Column System
    • Stock #222152
    • 3.5' (1 M) dia. x 82' (25 M) with 14' (4.28 M) tall skirt
    • Built: 1998
    • CS construction
    • Fluor Daniel design
    • 152 PSIG @ 248°F with (35) trays
    • Previously used to dry Hexane solvent which was used as a non-reactive polymer solvent in an LLDPE plant.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • (2) Shell and tube heat exchangers (498 sq. ft. and 237 sq. ft.)
      • (2) CS Tanks (3,387 Gallon and 385 Gallon)
      • (4) Pumps (two each of Durco and Goulds)

  • 70,000 Lbs/Hr High Pressure Propylene Splitter Column System
    • Stock #222153
    • 13' (3.96 M) dia. x 205' (62.5 M)
    • CS construction
    • Fish Engineering design
    • 338 PSIG @ 325°F with (100) Nutter trays
    • This system uses a combination of steam and hot quench water on (4) reboilers to purify a propane-propylene feed stream at 71% propylene to a final product stream at 70,000 Lbs/Hr of 91.5% propylene.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • 2,580 sq. ft. Steam reboiler with (484)  CS u-tubes
      • (3) 29,700 sq. ft. shell and tube heat exchangers (hot quench water reboilers)
      • (2) 39,000 sq. ft. shell and tube heat exchangers

  • High Pressure Ethylene Splitter Column System
    • Stock #222154
    • 8.5 (2.6 M) dia. x 183' (55.78 M)
    • Built: 1998
    • CS construction
    • Fish Engineering design
    • 355 PSIG @150°F with (79) trays
    • This system uses steam on the reboiler to separate an ethane-ethylene feed stream.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • (3) Shell and tube heat exchangers
      • 9,253 Gallon CS accumulator tank
      • (2) Centrifugal pumps

  • Styrene Splitter Column System
    • Stock #222155
    • 13.5' (4.11 M) dia. x 181' (55.17 M) with 22' (6.7 M) tall skirt
    • Built: 1995
    • CS construction
    • Huntsman design
    • 30 PSIG/FV @ 350°F
    • Includes (5) packed sections, each with 27 - 29 elements of Type 2Y Flexi-Pac packing
    • This system uses steam on the reboilers to separate an ethylbenzene-styrene feed stream.
    • Contact IPP for a process description and process flow diagram
    • Major equipment includes:
      • (7) Shell and tube heat exchangers (1.4 MM BTU/Hr to 34.6 MM BTU/Hr)
      • (2) Centrifugal pumps

IPP is a global cash buyer and seller of surplus manufacturing facilities, process plants, real estate and individual equipment. Have surplus plants or equipment to sell? Call 1-609-586-8004 and ask for Ross or Jan.

 
 Copyright 2002-2014 International Process Plants17A Marlen Drive Hamilton, NJ 08691 1-609-586-8004  
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships